The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model T (1909-1927) (https://www.fordbarn.com/forum/forumdisplay.php?f=2)
-   -   26/27block (https://www.fordbarn.com/forum/showthread.php?t=247643)

jetmek 07-12-2018 09:06 AM

26/27block
 

Got one here with the knock out between ctr cylinders never removed. How exactly does one run throttle rod over to carb? Is it some kind of industrial engine? Just need to know if i have to open that up. Thnx

Jack Innes 07-12-2018 11:14 AM

Re: 26/27block
 

The later style carb. had the rod across the top of the engine so the hole was not necessary;http://www.mtfca.com/discus/messages/257047/293128.jpg

jetmek 07-12-2018 12:40 PM

Re: 26/27block
 

Thank you!

39portlander 07-12-2018 07:50 PM

Re: 26/27block
 

Jack I like that oiler and mount you have on the fire wall, is it possible you could post a few close ups of your set up thanks. Scott

Jack Innes 07-12-2018 10:52 PM

Re: 26/27block
 

Quote:

Originally Posted by 39portlander (Post 1650456)
Jack I like that oiler and mount you have on the fire wall, is it possible you could post a few close ups of your set up thanks. Scott



Sorry, the picture is not my car. It was just used to illustrate the carb. linkage.


Jack

redmodelt 07-13-2018 12:03 AM

Re: 26/27block
 

the oiler is just a standard one, you can buy the base/holder from the suppliers.

nhusa 07-13-2018 11:08 AM

Re: 26/27block
 

Lang's has a conversion kit #6299CL
Don't forget to get the clamp on throttle rod leaver # 6297


All times are GMT -5. The time now is 12:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.