Inspection plate for Y-block bellhousing
 

City: Fort Walton Beach

State: Florida

I need an inspection plate for a Y-block manual transmission bellhousing.

thanks,
David

Re: Inspection plate for Y-block bellhousing
 

David
I have one.However It is all packed to go to Charlotte Auto Fair April 19th-23rd,If you know of anyone going there I am located in the Red field Spaces HR-54-55,Gr54-55.Asking $35.00 for it.If Not and I still have it when I get home Next Sunday I can Ship it to you for $40.Let me know before Wed Am. Jack

Re: Inspection plate for Y-block bellhousing
 

Thanks Jack,

A HAMB member had one as well and I sent him a check this morning. Thank you so much for responding to my want ad. I wish you lots of success at the Charlotte Auto Fair. Be safe in your travels.

David

Re: Inspection plate for Y-block bellhousing
 

did you find one yet?

Mike

Re: Inspection plate for Y-block bellhousing
 

Hey Mike,

To answer your question, yes and no. I did get an inspection cover from a HAMBer but it ended up being the wrong cover. Of course, I didn't realize this until I had stripped all the paint off and etch primed it. See pic:

https://www.fordbarn.com/forum/pictur...ictureid=14746

I've thought about modifying it to work, but I sure hate to cut up a perfect cover. I just wish I knew what Ford bell housing it went to. If someone had the cover I needed I wouldn't mind doing a trade with them. Here's a pic of the bell housing; as you can see it only has four bolt holes and the cover I bought has six and the shape is a bit different.

https://www.fordbarn.com/forum/pictur...ictureid=14747