Cut code for lock cylinder?
 

Folks - picture is of the door lock from my Town Sedan. No key. Would any of you happen to have the cut code for the A1213? And what blank? I'd like to try my local locksmith and give him all the help I can.

Thanks a million.

JayJay

Re: Cut code for lock cylinder?
 

A1213 = 23542 for a Briggs and Stratton cut.

Re: Cut code for lock cylinder?
 

The cut code for A1213 is 23542 this tells him how deep to make each cut, he will also need to know how much space between the cuts or spacing. Use Briggs & Stratton Gas Cap spacing. Most door locks use a B5 blank, try that first and if it doesn't go in properly try a B1 blank.

Re: Cut code for lock cylinder?
 

Superb, folks, thanks a million.


JayJay