The Ford Barn - Axle retainer

The Ford Barn (https://www.fordbarn.com/forum/index.php)

- Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)

- - Axle retainer (https://www.fordbarn.com/forum/showthread.php?t=118970)

Pete Fl/Wi

10-01-2013 10:05 AM

Axle retainer

1 Attachment(s)

I thought I would post a picture of the axle/drum retainers that Jim Pullen here on the barn makes for the 2 inch Bendix brake setup. Fit like a glove.
Pete

Bobs32

10-03-2013 05:01 AM

Re: Axle retainer

I bet they are not overpriced like the ones from Speedway !

19Fordy

10-03-2013 12:13 PM

Re: Axle retainer

Hi Bob, My retainers are made to fit the MT PRODUCTS 1939 Lincoln Bendix brake conversion kit far and are superior to ANY currently on the market. They are made of 1/4 inch thick and 3/16 inch thick steel not thin gauge bent sheet metal. Here's the low down.
http://fordbarn.com/forum/showthread...drum+retainers

19Fordy

10-03-2013 12:15 PM

Re: Axle retainer

Quote:

Originally Posted by Pete Fl/Wi (Post 736141)

I thought I would post a picture of the axle/drum retainers that Jim Pullen here on the barn makes for the 2 inch Bendix brake setup. Fit like a glove.
Pete

Hi Pete, Glad they worked out. They look good on your car. Thanks for the kind words. Feedback shows that each customer has been 100% pleased.

All times are GMT -5. The time now is 05:24 AM.