Flywheel inspection cover 53 8ba flathead..Any ideas where I can get a clutch/flywheel inspection cover? Didn't see any in for sale section. Haven't located any in stock at parts stores. Maybe someone has one laying around after tranny swap? Thanks
|
Re: Flywheel inspection cover Quote:
I don't have any spares, but all full cast iron '51-'53 Merc and '52-'53 Ford car bells use the same starter plates and lower inspection covers, which may make it easier to locate one. :) |
Re: Flywheel inspection cover Quote:
|
Re: Flywheel inspection cover 1 Attachment(s)
|
Re: Flywheel inspection cover they show up on ebay from time to time. you have to know what you are looking at though, i suggest study the pics at vanpelts web site put "flathead" in your ebay search
|
Re: Flywheel inspection cover Try Shoebox Central. 405-259-9222
|
Re: Flywheel inspection cover Quote:
|
Re: Flywheel inspection cover Quote:
|
Re: Flywheel inspection cover Quote:
https://www.fordbarn.com/forum/attac...4&d=1571691687 |
Re: Flywheel inspection cover 2 Attachment(s)
The left picture below is a '52-'53 Ford/Merc full cast iron bell housing with the starter plate and lower inspection cover. The second picture shows a '51 Mercury full cast bell with the same lower cover mounted on a block. These may be of help locating the correct cover. :)
|
Re: Flywheel inspection cover Quote:
|
All times are GMT -5. The time now is 12:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.