Repop 1931 splash shields Are the side splash shields for the 31 Model A good or is there fitting problems with the front fenders?
Thanks, 31 RPU |
Re: Repop 1931 splash shields Quote:
Contact Tom Jordan at Snyders and ask him. Tom will tell it to you straight up. Larry |
Re: Repop 1931 splash shields I used repo splash aprons from Sacramento Vintage on my late 31 sport coupe. They fit fine.
|
Re: Repop 1931 splash shields I'm no bodyman, but do know the curve in the front repro fenders is wrong where it meets the splash aprons, as Larry mentioned. A good bodyman can heat and reform that curve.
|
Re: Repop 1931 splash shields They will need a little massaging like most repo sheet metal.. You'll figure out where when you dry fit things before paint
|
All times are GMT -5. The time now is 11:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.