model A nut and bolt chart. Hi folks could anyone tell me or put me on the rite track. I have a box full off model A 28-9 engine nuts and bolts is there a chart or a book around that identify the nuts and bolts. Many Thanks.
Gerry (NZ) |
Re: model A nut and bolt chart. That would be a nice chart to have...hope someone posts one.
|
Re: model A nut and bolt chart. 3 Attachment(s)
Model A Ford Mechanics Handbook Vol 1 pages 132-134
|
Re: model A nut and bolt chart. Hi many thanks for the replys and thankyou very much for the charts. The nuts and bolts are all in soaking now.Thankyou.
Cheers Gerry (NZ) |
Re: model A nut and bolt chart. 2 Attachment(s)
Remember that the length, diameter and thread size is only part of the story. Some of the heads were domed. Some of the heads were "taller" than todays bolts. The heads didn't have hardness specified on them. You can't just get these at the local hardware store. For a correct restoration you need to restore original fasteners or order them from suppliers that have the correct heads.
Charlie Stephens |
Re: model A nut and bolt chart. Henry Ford sed, "IT'S ALL JUST NUTS & BOLTS"!---Whut wuz he SMOKIN'??????
"Maybe" he had been awake all night, just pondering, "Who invented THREADS & were the first ones SAE or them COARSE ones???? Bill Curious? |
Re: model A nut and bolt chart. Quote:
The same stuff Ed / Sonny sells;) |
Re: model A nut and bolt chart. Hi yes as I go through them (sorting them out ) i have noticed that some bolts have holes in the head off them and some heads are domed .oh dear what a night meer.:confused: Cheers Gerry (NZ)
|
Re: model A nut and bolt chart. Also check the back of the original parts book...
|
All times are GMT -5. The time now is 12:40 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.