Installing a radiator, support hood rod don’t fit
 

When installing a new radiator and attaching the correct radiator hoses the hood and radiator rods do not fit. Is it okay to lean the radiator slightly forward to make the radiator fit by readjusting the 2 bolts through the frame?
Is there a good way to make sure the fan doesn’t hit the radiator.

All comments will be appreciated. [email protected]

Re: Installing a radiator, support hood rod don’t fit
 

Firstly, this section is not for car questions - it is for site questions. Secondly, you should note the year and model of the car in the question and then post the question in the correct place according to the year.