Repro Dunn Aristocrat Gauge Panel 1 Attachment(s)
I purchased a reproduction Dunn Aristocrat dash panel a while ago, and today went to put it in the car unfortunately the Rex a Co gauges I have are too long. Does anyone have a suggestion for replacements, that will fit and don't look too modern?
|
Re: Repro Dunn Aristocrat Gauge Panel 1 Attachment(s)
The early Rochester or early Stewart warner small or big block sw will fit
|
Re: Repro Dunn Aristocrat Gauge Panel There was an original and at least one reproduction of the REXACO gauges. You might call Bratton's and ask how long their gauges are. Please post what you end up doing as I will have the problem in the future.
Charlie Stephens |
Re: Repro Dunn Aristocrat Gauge Panel 1 Attachment(s)
The early SW and Rochester gauges are about 3/4 inches deep. The rexaco ones are just over a inch and repo ones are even longer in the back.
|
Re: Repro Dunn Aristocrat Gauge Panel Nagel and early Rex-a-co are 3/4 deep
|
Re: Repro Dunn Aristocrat Gauge Panel :)Thanks guys, my repro. Rex-a-co are about two inches + the bracket to hold them in. I will start searching!
|
All times are GMT -5. The time now is 11:19 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.