6 Volt Erath Issue Well I know you barners have always advised on a good earth and starter cable size. Well I now have the same advise.
Ever since I've had my 33 I always had a problem starting cold & more so when hot. I got jack of it and checked out all that you have advised. 1. The earth went to the chassis, just a platted strap. 2. The only to the earth to the engine was another small platted strap to the mounting bolt of the starter. 3. A battery isolator installed on the firewall with 600mm leads battery to starter typical 12 volt size. I done away with the battery isolator changed all cable to "00" & located engine earth to the clam shell as specified. What a difference it cranks over like my old race car of 12 Volt into 6 Volt. Next I will be installing a battery isolator on the earth side. Hopefully this will be the end of my starting issues. Kpar |
Re: 6 Volt Erath Issue Just goes to show how a little effort can reap rewards.
|
All times are GMT -5. The time now is 08:51 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.