|
'46 Vent Window Gear Replacement 4 Attachment(s)
Both vent windows had stripped gears when Ibought the car. I purchase two kits, 11A-7023402-GR, (made inTaiwan) from DC. The gears in the kits were excellent and fit verywell. The rivets were too small 3/16" vs 1/4" dia. and almosttoo short to peen over even if they were the right diameter. The springsin the kits were the right size, but lacked I tension compared the originalspring. I couldn't get 1/4" rivets locally, so I used1/4"X3/4" NC bolts and locking nuts. Assembled nicely and thewindow/cranks work just like new.
|
Re: '46 Vent Window Gear Replacement Thanks for that. Good to know.
|
Re: '46 Vent Window Gear Replacement I also used lock nuts instead of rivets. Worked fine. There is ample room.
|
Re: '46 Vent Window Gear Replacement Same here used bolts on my '41.
|
Re: '46 Vent Window Gear Replacement Excellent information and thanks, too, for the source and your excellent pictures. Applies to our '47, so always interested!:)
|
| All times are GMT -5. The time now is 09:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.