'30-'31 Coupe inside door to B pillar gap
 

'30-'31 Coupe (45B) Inside of car ,facing door rear edge & B pillar..Whats the gap between the door shell rear edge to the B pillar... Interested in @top ,@ lock area,and bottom...Logic says it should be even , but would appreciate some real world measurements...
If someone has a car with good fitting doors could measure the inside gap for me ,I would greatly appreciate it
I'm trying to verify fitment before I fasten anything permanently..
Thanks ,
Stan

Re: '30-'31 Coupe inside door to B pillar gap
 

This might help a little. http://www.fordgarage.com/pages/bodymeasurements.htm


Bob

Re: '30-'31 Coupe inside door to B pillar gap
 

Bob: Thanks for the reply...I'm aware of those measurements and they are not what I need to verify some fitment issues..
I have searched the archives and have read /seen the normally referred to threads
Stan