The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   cylinder bore spacing (https://www.fordbarn.com/forum/showthread.php?t=261923)

Flat32 04-16-2019 03:14 AM

cylinder bore spacing
 

I've spent hours searching for cylinder bore spacing and find nothing.

I know the spacing for the Flathead v8, but not the Lincoln Zeyphr and the V8 60.

I'm needing these dimensions to make my computer models of these engines.
I know Ford used fractional dimensions for bore spacing so simple ruler measuring of head gaskets would be OK.

Anybody have this info or gaskets readily available??

Thanks,
Ray

Elmo Rodge 04-16-2019 08:36 AM

Re: cylinder bore spacing
 

Ray, starting at center of one end, 3 3/16, 7 13/16, 11. That's for a "60".
Wayno

Flat32 04-16-2019 02:34 PM

Re: cylinder bore spacing
 

Great. Thanks Wayno.
I pulled the trigger and ordered a complete Zephyr gasket set so I'm covered for the V12.


All times are GMT -5. The time now is 03:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.