The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Sharp dressed helmet ???? (https://www.fordbarn.com/forum/showthread.php?t=281061)

BUBBAS IGNITION 05-15-2020 12:37 PM

Sharp dressed helmet ????
 

5 Attachment(s)
This made me you tube the tune " Sharp Dressed Man" bu ZZ top . This would be the ultimate sharp dressed helmet ... all the good stuff , 11A advance weights , small cam dual hd echlin points, new load tested condensor, gaskets and proper wire set .......polished case (Andy Tantes )
Ran on tester and adjusted then ran 5000 plus for a few minutes and rechecked ......
Cant for the life of me figure why you would ever run anything else ??? And this customer has the tubes as well ,
Gotta be the look with all the performance you ever need .....:eek:

And the brown plastic liesure suit ????

listen to the tunes :
https://www.youtube.com/watch?v=7wRHBLwpASw

petehoovie 05-15-2020 12:52 PM

Re: Sharp dressed helmet ????
 

Quote:

Originally Posted by BUBBAS IGNITION (Post 1887880)
This made me you tube the tune " Sharp Dressed Man" bu ZZ top . This would be the ultimate sharp dressed helmet ... all the good stuff , 11A advance weights , small cam dual hd echlin points, new load tested condensor, gaskets and proper wire set .......polished case (Andy Tantes )

https://www.fordbarn.com/forum/attac...9&d=1589564210

FlatheadTed 05-15-2020 01:33 PM

Re: Sharp dressed helmet ????
 

Nice Job Bubba, I like the diver there's a bit of the Botch in there because of Emel .I got a call out Frid night to fix one

Zeke3 05-15-2020 01:49 PM

Re: Sharp dressed helmet ????
 

Great looking distributor, that would look great on my 21 stud. Have to think about having the case polished.

tubman 05-15-2020 02:02 PM

Re: Sharp dressed helmet ????
 

The sticker on the front provides a proper finishing touch!

BUBBAS IGNITION 05-15-2020 02:05 PM

Re: Sharp dressed helmet ????
 

Quote:

Originally Posted by FlatheadTed (Post 1887895)
Nice Job Bubba, I like the diver there's a bit of the Botch in there because of Emel .I got a call out Frid night to fix one

the polish dude .........
https://www.facebook.com/aluminumpolishing

Ggmac 05-15-2020 02:14 PM

Re: Sharp dressed helmet ????
 

Excellent !

41panelmark 05-15-2020 02:37 PM

Re: Sharp dressed helmet ????
 

Very nice...

grumppyoldman 05-15-2020 07:08 PM

Re: Sharp dressed helmet ????
 

You should have polished mine like that, looks sharp. Al

MrModelT 05-17-2020 08:24 PM

Re: Sharp dressed helmet ????
 

That is downright GORGEOUS...������

26 lakes 05-17-2020 09:11 PM

Re: Sharp dressed helmet ????
 

3 Attachment(s)
Thought I would show some of Jim's outstanding workmanship. This V12 was converted to V8 . Coil was redone by Skip Haney. It will be used on a 1941 Mercury flathead. This is going in a pre war lakester. Should have fire going through it by the end of the year.

petehoovie 05-17-2020 09:15 PM

Re: Sharp dressed helmet ????
 

Quote:

Originally Posted by 26 lakes (Post 1888864)
Thought I would show some of Jim's outstanding workmanship. This V12 was converted to V8 . Coil was redone by Skip Haney. It will be used on a 1941 Mercury flathead. This is going in a pre war lakester. Should have fire going through it by the end of the year.

https://www.fordbarn.com/forum/attac...3&d=1589767570

https://www.fordbarn.com/forum/attac...4&d=1589767570


All times are GMT -5. The time now is 10:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.