The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (https://www.fordbarn.com/forum/forumdisplay.php?f=9)
-   -   1935-1941 Ford Pickup Parts (https://www.fordbarn.com/forum/showthread.php?t=2485)

Aircooled1 05-21-2010 10:50 AM

1935-1947 Ford Pickup Parts
 
City: Los Molinos
State: Ca.
Price: $250

14 Attachment(s)
I have early 1935 through 1947 Ford 1/2 ton pickup parts available, I recently acquired most of two 1/2 ton pickup cabs, one chopped off top 1936 and one stock 1937 and have a lot more parts available, from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email anderaircooled@aol.com or call 530-384-1651

howco 05-21-2010 12:45 PM

Re: 1935-1941 Ford Pickup Parts
 

Hey Aircooled, looking for a 1937 Ford 1/2 ton truck grill..

crider 05-21-2010 04:47 PM

Re: 1935-1941 Ford Pickup Parts
 

I'm looking for a 35-36 glove box door.

fordzilla9 05-23-2010 09:08 AM

Re: 1935-1941 Ford Pickup Parts
 

I am looking for a 1940-41 1/2 ton pickup hood and 2 fenders in good condition.

robert stafford 06-08-2010 11:56 PM

Re: 1935-1941 Ford Pickup Parts
 

I need a 35-37 pickup right front fender brace (the large one). Please advise. Thanks, Rob in WA State

blindmouse 06-09-2010 07:54 AM

Re: 1935-1941 Ford Pickup Parts
 

I need grille and front fenders for 39 pu.

40fordman 06-17-2010 02:10 AM

Re: 1935-1941 Ford Pickup Parts
 

need passenger side front fender for 40 ford pick up

langan 07-07-2010 06:54 PM

Re: 1935-1941 Ford Pickup Parts
 

Is this Jim? I am looking for 35-36 truck grill trim?

Mike in Mass 07-14-2010 06:53 PM

Re: 1935-1941 Ford Pickup Parts
 

HI Jim still looking for a very nice steering wheel and column drop for a 39 pic-up thanks mike p

s1b 07-21-2010 02:52 PM

Re: 1935-1941 Ford Pickup Parts
 

Sent you a Email about backing plates.

jessedog 09-20-2010 07:52 PM

Re: 1935-1941 Ford Pickup Parts
 

I will be removing my steering wheel out of my 38 ford pu if interested in wheel and column drop with key let me know, I will be doing this starting in Nov., I have to figure out what cost to ask. Jerry

Burny 09-20-2010 11:36 PM

Re: 1935-1941 Ford Pickup Parts
 

Need front fender brackets for a '37- the large ones that the headlights mount on...

badassford 09-27-2010 09:03 PM

Re: 1935-1941 Ford Pickup Parts
 

You sent pics of one cab but no price. I notice that the price listed on one web site is 650 and on another it is 550.00 What are the prices on your other 35,36 cabs?

badassford 09-27-2010 09:04 PM

Re: 1935-1941 Ford Pickup Parts
 

my email is Timshotrodsho@gmail.com

rustyrods 09-28-2010 09:36 AM

Re: 1935-1941 Ford Pickup Parts
 

I COULD USE A TITLE FOR ONE . PLEASE EMAIL larmar@grics.net

lindamt3333@yahoo.com 09-28-2010 11:10 AM

Re: 1935-1941 Ford Pickup Parts
 

hi looking for 1937 pickup grill i am calling from mass. my number is 19786675343
or my e-mail is lindamt3333@yahoo.com. thank you Jim

Gordon Ellis 10-05-2010 06:38 PM

Re: 1935-1941 Ford Pickup Parts
 

Am looking for a 41 Ford 1/2 ton pickup grille. Do you have one, and whats the overall condition and price? Email me at............... gnellis2003@yahoo.ca

kiwi88 10-22-2010 11:55 PM

Re: 1935-1941 Ford Pickup Parts
 

Hi. I'm looking for a pair of good or workable 36 rear p/u fenders plus a good deck. C

exoilfld 10-25-2010 11:10 AM

Re: 1935-1941 Ford Pickup Parts
 

Do you have a hood pull for a 41 truck? The little handle you pull to open the hood. My email is etobp@yahoo.com Thanks

Bri35Ford 11-01-2010 01:04 PM

Re: 1935-1941 Ford Pickup Parts
 

Hi....... Im looking for a 35 Ford pk up inner grill shell, It has two crank holes pressed into it . https://www.fordbarn.com/forum/pictur...634812&thumb=1


All times are GMT -5. The time now is 05:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.