Head Gaskets I’m replacing the head gaskets on my 1937 Ford as one side was leaking and the other had a stripped spark plug hole. Both heads are in a machine shop now, having the surfaces ground and the repair done. The engine was overhauled in 1955 and they used steel faced gaskets.
I see that copper gaskets cost more than the steel ones. Which would you suggest using? All suggestions/advice will be appreciated. Thanks, Robert |
Re: Head Gaskets Perhaps the Best Gaskets which have a composite modern materials in use.
Also depends on heads in use, CI or Aluminium. Phil NZ |
Re: Head Gaskets Thanks Phil.
I just got the heads back from the machine shop. He also recommended BEST brand gaskets so I have ordered a pair. The car has cast iron heads. |
All times are GMT -5. The time now is 09:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.