.080 brand new pistons City:
pulaski
State:
va
Price:
trade
1 Attachment(s)
here is a full set of new .080 oversize pistions with the wrist pins.never have been used.when i miked the bores of the motor i am currently working on i thought .080 pistons would work but the cylinders did not clean up whitch left me with the pistons i could not use.i would like too trade them for a complete set of standard pistons(3.875 dia.)of equal quality.usa trads only(lower states).
|
Re: .080 brand new pistons I'll look and see what I have. I know I have a set of very little used std pistons but don't know if I have any brand new ones.
|
Re: .080 brand new pistons thanks jamers let me klnow what you find.
tex |
Re: .080 brand new pistons Tex, I looked and found I have a new set of standard pistons that have a little discoloration on the tops but are none the less new. I can send a pic if you want and we can work out a trade. The pistons have new rings on them if you need them. If not I will use them elsewhere.
|
Re: .080 brand new pistons james
i can also use the rings.are the wrist pins with them?i don't know how too send a privet message on this new site so i can give you my name and address.if you do tell how it is done. tex |
Re: .080 brand new pistons The wrist pins are there and also the clips. To send a PM clik on my name above my avitar and a box will drop down. Clik on send a private message to James Rogers and a message box will open.
|
Re: .080 brand new pistons i have a set of std, very nice ran for less than a hour, or so i was told they do look new let me know hattiesburg ms will pay for shipping both ways cell is 601-408-5256
|
Re: .080 brand new pistons allen
i have already made a trade with someone else.thanks for the reply. tex |
All times are GMT -5. The time now is 12:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.