180A Rear bumper crossbar spacer Does anyone have the dimensions for the rear bumper crossbar spacers used on the deluxe phaeton (180A) with the one piece rear bumpers?
Thanks, Will |
Re: 180A Rear bumper crossbar spacer 2-3/4'' Total Lenth / center to center of hole's 1-3/4'' / 1/2" off center off hole to edge. Same thickness as bumper bar brackets 5/16".
|
Re: 180A Rear bumper crossbar spacer 3 Attachment(s)
here's a picture of an original one
the ends are sheared at a slight angle you can take a large bracket and cut it to look like this turn the sheared end to the rear and it will look fine it is 2 3/4 like Peter says tom |
Re: 180A Rear bumper crossbar spacer Thanks guys!
|
Re: 180A Rear bumper crossbar spacer I have several NOS 180A rear bumper crossbar spacers that are now available. Until reading this I knew what they were but did not know their the year and body style application.
|
Re: 180A Rear bumper crossbar spacer i believe they are the same for all cars
they are just a substitution for the bumper bracket they are replacing tom |
Re: 180A Rear bumper crossbar spacer They are put there when you only have a FULL bumper on the back.
|
All times are GMT -5. The time now is 09:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.