Fuel Pump Fitting Any recommendation on a 5/16 hose adapter to fit inlet side of a fuel pump? Dosn't appear to be a pipe thread.
|
Re: Fuel Pump Fitting Try a JIC type tail. I think it's 9/16 AF but seals on the tapered seat at the back of the hole. Not 100% sure, but not a pipe thread.
|
Re: Fuel Pump Fitting For most of the early Ford fuel pumps the thread is 1/2-20 but the fitting also needs a seat to seal properly. Check out the Stromberg web site or Vintage speed. IMO, 1/4 I.D. should be fine for 2 to 3 Carbs.
|
All times are GMT -5. The time now is 04:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.