Hershey 2021 Guide for Barners
 

Hi gang. Thought I would start our annual spot locater for barn members at Hershey. My crew and I will be in spots RCK 14-21 with V8 parts, included but not limited to wire harnesses, wheel toys, body parts, engine and chassis parts. Stop in and say hello. Pete/Ct.

Re: Hershey 2021 Guide for Barners
 

Tim Ayers & Scott Shepherd OBG 23-25.

Flathead related parts and other junk that I don't need, but you absolutely need in your garage.

'39 original radiators
'36 roadster fenders

Re: Hershey 2021 Guide for Barners
 

Don Rogers CCN 59-61 Lots of 35-36 Ford Parts

Re: Hershey 2021 Guide for Barners
 

Obj 15-17. Still sorting thru stuff.

Re: Hershey 2021 Guide for Barners
 

Chocolate Field South CO 19-20. '36 left front fender, '35-'36 cabriolet driver's door, set of mint '36 spiders.

Re: Hershey 2021 Guide for Barners
 

Chocolate Field C4J 33 to 35. Flathead aluminum speed parts of various types and prices.
Overhead valve heads for the Ford V-8 sixty block specially imported. Plus possibly lots more. Oh yea and lots of bench racing the wonders of 200 MPH Ford flatheads. :)

Re: Hershey 2021 Guide for Barners
 

CU 36-39 with glenn Sanders. V8 truck parts

Re: Hershey 2021 Guide for Barners
 

I'll have my '35 fordor parked in RCA 102, but will be walking around looking for goodies most of the time, from Tuesday to Friday. Will also be at the Early Ford V-8 Club table @ Dennis Carpenter's around noon on Thursday.

Re: Hershey 2021 Guide for Barners
 

CJ 80-83 , not too sure what I'll have yet. Possibly a few speed parts.... I'll probably be out walking most of the time though.

Re: Hershey 2021 Guide for Barners
 

I will be there Tuesday thru Friday in the Orange field OBF 12-13 but I am I’ll be vending at either OAG 1-3 (just on the corner of Tim Ayers row) or just across the aisle from him. If stuff does not sell at Carlisle, I will have a really nice 40 standard dash complete with ash trays, radio block off, glove box door, center grille, and a nice gauge cluster, extra ashtrays, and other misc old stuff. My buddies will also have quite a bit of old stuff, depending on how well Carlisle goes.

Re: Hershey 2021 Guide for Barners
 

i think you responded before but wondered if you had or knew of any one who had a set of 1935-36 1/2 ton pickup headlight buckets for sale ? Thanks gil

Re: Hershey 2021 Guide for Barners
 

Hopefully it still happens

Re: Hershey 2021 Guide for Barners
 

Hey Men, it is HERSHEY 2021 indeed !!!

RED Field, RCC 74 - 76,
Mountain of Ford Parts, 1939 - 1970s.... Lots of O E M FOMOCO and Motorcraft....

Three (3) last N.O.S. FOMOCO / Motorcraft 1964 - 1966 Ford Mustang
Head Lite Switches !!! (In the year 2021 !!! How lucky can you get ?!?!?!)

Stop on by, Yours, Craig...

( I L 78 - 80 @ Fall Carlisle )

Re: Hershey 2021 Guide for Barners
 

Under light pole 45 in the Chocolate Field. I don't even know my space numbers. Easiest way to let folks know where I am. Lots of early Ford stuff.

Re: Hershey 2021 Guide for Barners
 

Gil, I sent you a Fordbarn PM message on a set of these pickup truck headlight buckets, but never heard back from you.

Re: Hershey 2021 Guide for Barners
 

I'm at CJ 71-73 Mostly model A stuff. Will be out shopping for 40 parts.

Re: Hershey 2021 Guide for Barners
 

I'll be in the orange field OBE 37-38

Re: Hershey 2021 Guide for Barners
 

Be sure to visit the Early Ford V8 Foundation site near Dennis Carpenter!

Re: Hershey 2021 Guide for Barners
 

I'm at C4J-36
Old signs and stuff! 32 rear spring, 17" wheel, 16" bent spoke wheel,etc. Stop by and sit awhile.

Re: Hershey 2021 Guide for Barners
 

my name is george, I will be with Ed (two speed) Carr in spot C2I-49-50 ect. I will have some V8 ford (1937) parts among others. I have a hood for the 37 that in my opinion is the nicest 37 hood out there for sale. If you or anyone you know needs this hood you need to come by and check it out. Never been mounted, painted inside & out, all steel, not a repop. Was going to louver it, but it's just to nice. Should go on a concourse car. I have used hinges & hood prop that go with it. Come by and tell me what you think of at. Always willing to listen & learn from other in the know Ford people.Good luck, see in two weeks.