The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Windshield project (https://www.fordbarn.com/forum/showthread.php?t=276254)

dlfrisch 02-02-2020 02:57 PM

Windshield project
 

Trying to remove my front windshield to have the new glass installed I treated the square nuts holding the main hinge with pen. oil (a couple of times in two days)- the original nut will not brake loss. Now on top of this situation the screw heads got open with this fussing and now the screw driver end will not hold. I tried to reach-in with my grinder - NG. I tried to drill the screw head - NG. They must be S S, the bit will not even start.
I appreciate suggestions and help with this matter.

Tacoma Bob 02-02-2020 03:05 PM

Re: Windshield project
 

With the windshield open is there room to hold a drill. Might have to drill em out.

Mikeinnj 02-02-2020 04:09 PM

Re: Windshield project
 

With the windshield off the car apply heat to the screw with a propane torch then apply some penetrating oil while the screw is still hot. Let it cool completely and add more penetrating oul. Let it sit a day. Time is your friend... If no go, repeat.
You could then use a small pointed drift and hammer to tap te screw slot counter clockwise. It worked for me. Of course I ended up re-painting the frame and installed new rubber mouldingd.I would not drill them as you could damage the threads in the frame.

dlfrisch 02-02-2020 05:05 PM

Re: Windshield project
 

I just came home and saw a couple of “posts”reply’s on Ford Barn. Looking the situation over with my unbelievable wife.... she said, why don’t you try to slide the existing frame out of the butt hinge. A little penetrating oil, a block of wood and a small / heavy hammer, the whole frame - the broken glass in all slid right out. Now, I will get my new replacement glass in and slide the unit back together. It’s really neat to have a smart - helping wife !

Gary WA 02-02-2020 06:30 PM

Re: Windshield project
 

1 Attachment(s)
Thanks for the update! Better keep that wife around.

J Franklin 02-02-2020 09:14 PM

Re: Windshield project
 

Quote:

Originally Posted by Gary WA (Post 1847924)
Thanks for the update! Better keep that wife around.

And a special night out! It's all worth it in the long run.

Mikeinnj 02-03-2020 11:52 AM

Re: Windshield project
 

1 Attachment(s)
Thought you were trying to remove these screws and that is what I commented on. They can be a bugger to remove from the corners of the frame when installing new glass.

Floats 02-04-2020 08:53 AM

Re: Windshield project
 

She sure is a keeper

old31 02-04-2020 09:59 AM

Re: Windshield project
 

Can I borrow your wife for some help on my A?


All times are GMT -5. The time now is 08:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.