The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Floor plans Early 1928 RHD (https://www.fordbarn.com/forum/showthread.php?t=247304)

Wagga A'er 07-04-2018 09:57 PM

Floor plans Early 1928 RHD
 

Do any members have floor plans for an early Australian 1928 Pheaton RHD, with a side hand brake that they can share?
Thanks

Hoogah 07-04-2018 11:03 PM

Re: Floor plans Early 1928 RHD
 

Ask Pooch. He may be able to help.

john charlton 07-05-2018 12:54 AM

Re: Floor plans Early 1928 RHD
 

This depends on whether the car has a wood floor and subrails or the all steel floor and subrails . Australian built cars had wood in the body to up local content to keep down import duties . If you are lucky the car could have come in from NZ and would be all steel so getting a floor would be no problem as this is readily available in repro . Nobody outside of OZ will have the information you require as OZ was the only country who used wood floors and sills mainly in open cars . Get in contact with a local A club they should have an early phaeton you can take photos and measurements from .


John in lovely sunny warm morning Suffolk County England .

Dave Slater 07-05-2018 08:04 AM

Re: Floor plans Early 1928 RHD
 

When you say floor plans do you mean the timber subframe? If so I could help you out with patterns. Dave 0412-59-3535


All times are GMT -5. The time now is 12:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.