Crankshaft seal 59ab LOOKING FOR HELP ON THE FRONT COVER FOR A 59AB ENGINE CRANKSHAFT SEAL. i HAVE ALWAYS USED THE OLD STYLE ROPE SEAL. THERE ARE NEW STYLE SEALS AVAILABLE, i HAVE TWO ONE IS ALUMINUM WITH AN OUTER O RING THE OTHER IS ALL BLACK IN COLOR. i WOULD LIKE TO KNOW WHICH ONE WOULD SHOULD BE USED. ANY ADVICE WOULD BE APPRECIATED. tHANKS sTAN
|
Re: Crankshaft seal 59ab Use the rope seal. It's the best solution.
|
Re: Crankshaft seal 59ab I use the one piece seal exclusively. Either one will work just fine. I don't have a preference.
|
Re: Crankshaft seal 59ab Stan I like the aluminum one with the outer O ring I found it centers nicely between the pan and front cover especially considering each are somewhat different in shape. Found no leaks at 200 MPH.
Ronnieroadster |
Re: Crankshaft seal 59ab Hi guys, new here & wondered if somebody could tell me the years that they had the pin to prevent you from replacing the rope seal from the bottom--
the easy way. Thanxs, Pete |
Re: Crankshaft seal 59ab I should have said that although my car is a '41, the PO said the engine is a '49, but I haven't confirmed that.
|
All times are GMT -5. The time now is 05:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.