Steering column for '36 banjo wheel
 

I'd appreciate any suggestions for an aftermarket steering column that would allow me to mate my '36 banjo steering wheel to a Flaming River Vega steering box. Just want a basic column, no tilt, etc. Plan to have old school type signal light lever clamped on the column.

Re: Steering column for '36 banjo wheel
 

What front end are you using? If something like a '39 with hydraulics, you might think of using a '37 steering column.

Re: Steering column for '36 banjo wheel
 

You posted in a forum of fordbarn that is intended for questions to the editors. You might have better luck in the main forum. Even better, post on HAMB where they deal with modified cars: https://www.jalopyjournal.com/forum/...ssage-board.5/

Charlie Stepehns