Identifying a model A frame
 

I know it's here, but I can't seem to find it. How can I tell a 28/29 frame from a30/31 frame? ...from the bare frame alone.

Thanks!

Re: Identifying a model A frame
 

Check the serial number on the frame first, if there is one.

David Serrano

Re: Identifying a model A frame
 

Here you go...

http://www.plucks329s.org/pdf/frame/..._Assembly2.pdf

Have fun.

Pluck

Re: Identifying a model A frame
 

Thank you!

Re: Identifying a model A frame
 

Re: Identifying a model A frame
 

Look at the front crossmember. The radiator supports are different. 30 31's are lower.28 29's are even with the frame rail.

Re: Identifying a model A frame
 

28/29 frames are drilled both sides for RHD and LHD for the steering box.30/31 frames are mostly drilled on one side depending whether the vehicle was built RHD or LHD .However there are 30/31 frames that are drilled both sides there is one under my P/U which also has the early handbrake cross shaft . This early 30/31 frame is in the minority and does come with the correct "low dip" rad mount area . If you see a frame which at first glance has only one steering box hole it is definately 30/31.

John in Suffolk County England.