3- 97's Installed
 

Installed Uncle Max rebuilds. Engine runs better now. I have two conditions that most BARNERS don't like.

...no pressure regulator
...straight linkage instead of progressive

If the wrong way works why should I worry.

Re: 3- 97's Installed
 

Re: 3- 97's Installed
 

Max did 4 Strombergs w/ direct linkage for our buddy in N.E. That channeled '40 cpe drove all over incl hill climbs.
Charlie ny

Re: 3- 97's Installed
 

VERY nice. One of the best setups for our Flatheads.

Re: 3- 97's Installed
 

Our buddy in NE........Walt DuPont.......
Charlie ny

Re: 3- 97's Installed
 

I gave Walt a t-shirt that had a Flathead on it with four carbs........Mark

Re: 3- 97's Installed
 

Nice lookin' setup; as long as it runs well, who cares about the number of carbs and type of linkage? Now, what are you going to use for air cleaners?

Re: 3- 97's Installed
 

I have a pressure regulator on my trip 97's and run straight linkage with no problems. Go with what ever works for you.

Re: 3- 97's Installed
 

Hi Roger; What cam are you running? Thanks, Craig.

Re: 3- 97's Installed
 

I'm also running 3 English 97s straight with no issues.

Re: 3- 97's Installed
 

L100 that was recommended by Ol' Ron
276 CID with crab ignition....screened air cleaners are now on.
Offenhauser 400 heads

Re: 3- 97's Installed
 

I ran three 94s with straight linkage, no regulator for several years on my 296 motor......never a bit of trouble.

Re: 3- 97's Installed
 

Re: 3- 97's Installed
 

Looks sweet. Love that setup.