The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Reverse eyed spring with Mitchell OD? (https://www.fordbarn.com/forum/showthread.php?t=280166)

Pandersen33 04-28-2020 03:24 PM

Reverse eyed spring with Mitchell OD?
 

Has anyone done this? I am working on a 35 sedan and would like it to sit just a bit lower. However the Mitchell OD doesnt look like it has too much more room over it. Just curious if I need to look at more cutting or if another approach is necessary. Thanks

37 Cab 04-28-2020 03:32 PM

Re: Reverse eyed spring with Mitchell OD?
 

I have a Mitchell in my 37 with reversed springs. I made a box 1 inch higher than the tunnel for clearance. 1+ wider on both sides for side to side movement.


All times are GMT -5. The time now is 06:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.