m121 & j80 heads What are m121 & j80 cylinder heads ? New to me, but i aint too smart about these things. Thanks again. mike
|
Re: m121 & j80 heads Pictures?
|
Re: m121 & j80 heads No pics, they are for an 8ba. Look like any 8ba head but marked m121 & j80....Merc, Canadian,??? Thanks, m
|
Re: m121 & j80 heads Sounds like casting dates to me, but pictures sure would help.
|
Re: m121 & j80 heads How about J - Sept and M - December? Newc
|
Re: m121 & j80 heads These heads are on E bay & i just wondered what they are. Not savvy enough to bring the pics to the Barn. No big deal thanks anyhow. m
|
Re: m121 & j80 heads Quote:
|
Re: m121 & j80 heads Hi Denny, no auction #, but here's an item #: 372085834460. Never saw heads with those numbers? No biggy. Thanks, m
|
Re: m121 & j80 heads 1 Attachment(s)
Here's a picture. You can make out the "M121" on the bottom head. Notice the casting of the screw head. That is obviously a date code. The curious thing is that there is no model number (8BA, 8CM, EAB), so I can't tell what they are (there may be some that can, just by looking at the combustion chambers which are shown on the eBay auction). All I see is a set of junk heads that had some aluminum paint slopped on them.
|
Re: m121 & j80 heads Looks to me like someone ground the markings off and then painted them. The surface looks too smooth, not like a typical casting.
|
Re: m121 & j80 heads I thought probably junk too, but i'm uneducated, so..........thanks guys!!! m
|
All times are GMT -5. The time now is 08:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.