rear pan seal. Hi everybody. I have another question for you. I'm finishing up freshening my flathead and I'm curious to know what you might suggest for the rear pan gasket. When I originaly pulled then the gasket was in pieces. Brittle and in several pieces. I have no problem with cork, and will use it again, but if there is a better material, I would rather use it instead. Just wanting to be neat and clean you understand:) Thanks for your input, Pat
P.S. The engine is a 221 and has had sleeves removed and bored 40 over. I put some reds headers, Isky 400 cam and lifters, Isky heads and 3x2 Intake. It's coming along fine, I just don't care for that rear gasket arrangement. |
All times are GMT -5. The time now is 01:49 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.