Roadster Dash Screws What threads are the screws that hold the dash to the body in a 32 Ford Roadster?
|
Re: Roadster Dash Screws 12-24 I believe. David will be along shortly
|
Re: Roadster Dash Screws They are a 12-24 binding head screw 5/8” long.
|
Re: Roadster Dash Screws Yep, nickel plated.
|
Re: Roadster Dash Screws If you have a screw in hand, and want to be able to know its nominal "number" size, there's a formula for that. The nominal size is the "number" of the size multiplied by .013 and then added to .060. That nominal size is actually the maximum size of a tap so the screw would be a couple of thousandths less. In this case, a #12 screw would be (12 x .013) + .060 = .216. So if you put a micrometer or a pair of calipers on the screw, you should expect them to read about .212 to .215 or so. A #6 screw would be (6 x .013) +.060 = .138 or so.
|
All times are GMT -5. The time now is 11:41 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.