brakes on my 40 brake pedal goes all way down but can be pumped up, this happened after installed new wheel cylinder kits on the front wheels but not till i adjusted the brake shoes then it lost it, i have pulled the hubs and rechecked everything and re adjusted and have bled them 3 times did the master lose it at some point? after pumping up keeping pressure on it seems to hold the pressure thank you hopefully Gene
|
Re: brakes on my 40 i would check and bleed the master cylinder before i did any thing else
|
All times are GMT -5. The time now is 12:34 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.