kingston l4 carburaters Who has l4 parts? I have 2 nice cores, 1 brass and 1 cast iron, been beaded and clean , but I need bowls , floats , and choke/throttle shafts.
|
Re: kingston l4 carburaters Lang's has most any part that you might need: https://www.modeltford.com/
Here's how to rebuild it: https://modeltfordfix.com/repairing-...-model-t-ford/ |
Re: kingston l4 carburaters Problem is I would like to know what is interchangeable between Holley and Kingston. and most everything Langs or anyone else lists is for Holley NH.
|
Re: kingston l4 carburaters What you see in the catalogs is about it for new parts. I would suggest posting a want ad here and on the Model T Ford Club of America's site for the parts not listed in the catalogs. Call Lang's, they have parts not listed in the catalog and might be able to help.
I would have to check for sure but seems to me Snyder's may have the spray needle listed in their new dealers parts list. I have a few extra NOS air valves/flappers. Contact me off line if you need any. With a little work you can use the NH throttle shaft, I did that on mine. |
Re: kingston l4 carburaters The throttle arm from a late NH is about the only part that will interchange with an L4.
Quote:
|
All times are GMT -5. The time now is 01:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.