The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Late V8 (1954+) (https://www.fordbarn.com/forum/forumdisplay.php?f=5)
-   -   t86 R10 OVERDRIVE REBUILD (https://www.fordbarn.com/forum/showthread.php?t=279660)

zoegrant 04-18-2020 10:08 PM

t86 R10 OVERDRIVE REBUILD
 

Hey guys...while my tranny is out of the car I thought I would inquire to see who you would recommend for a professional rebuild ?

Alaska Jim 04-19-2020 12:31 AM

Re: t86 R10 OVERDRIVE REBUILD
 

Mac van Pelt, but he is a little away from you. I do not think shipping would be that bad in the lower 48

Hot Rod Reverend 04-19-2020 07:29 AM

Re: t86 R10 OVERDRIVE REBUILD
 

Ditto on Mac van Pelt

Mac VP 04-20-2020 05:27 AM

Re: t86 R10 OVERDRIVE REBUILD
 

We’re doing a T-86 in the shop right now. We’re several weeks out on rebuilds right now but you can get yours in the queue if you want. Call our office if you want to inquire about a rebuild.

steve fritz 04-20-2020 02:56 PM

Re: t86 R10 OVERDRIVE REBUILD
 

Saw your message on swapping solenoids , I have a good 6 volt from my 55 project and am converting to 12 volt , so maybe we can do the swap. call me or text at 608-738-1861 or email me at [email protected]
I tried to reply to your swap meet listing but got an error message and am trying to work that out.
Steve

scicala 04-26-2020 11:26 AM

Re: t86 R10 OVERDRIVE REBUILD
 

Steve, the Ford Barn stopped allowing replies on swap meet adds a while back. Have to send a PM instead.


Sal

paul2748 04-26-2020 07:59 PM

Re: t86 R10 OVERDRIVE REBUILD
 

You have to either e-mail or send a PM in order to reply to a want ad.


Quote:

Originally Posted by steve fritz (Post 1877036)
Saw your message on swapping solenoids , I have a good 6 volt from my 55 project and am converting to 12 volt , so maybe we can do the swap. call me or text at 608-738-1861 or email me at [email protected]
I tried to reply to your swap meet listing but got an error message and am trying to work that out.
Steve



All times are GMT -5. The time now is 05:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.