Model A Floor Insulation
 

I wanted to thank all of you guys for your advise on insulating the floor of my Model A.

I have completed the insulation installation.
Now onto the next project.

Thanks!!!!!

Re: Model A Floor Insulation
 

Nice job. I am sure it will prove to be well worth the effort and expense.
Thanks for the update.

Re: Model A Floor Insulation
 

Nice job. I did something similar, but not nearly as tidy. I bet it will be quieter and more comfortable.

Ken

Re: Model A Floor Insulation
 

What did you do for the roof area?

Re: Model A Floor Insulation
 

Good Job!!

I just recently insulated the floor and doors in my Town Sedan. Since my car was "put together" I couldn't cover everything as you did. One of these days if I ever have the back seat backrest out I would like to insulate the rear of the body.

I think insulating the doors and cowl area gave me the biggest change. It really makes the car sound solid, especially when closing the doors.

https://www.fordbarn.com/forum/pictu...ictureid=39546

https://www.fordbarn.com/forum/pictu...ictureid=39547

Re: Model A Floor Insulation
 

To Brent in 10-uh-C,

I have only started on the top. I have the cushion material and the vinyl material just laid out on the top to get the vinyl to "relax". I am going to work on the top this summer.
Thanks,

Re: Model A Floor Insulation
 

I am impressed with your skill and craftsmanship!

Re: Model A Floor Insulation
 

I have insulated the roof section of several Sedans and have found this is huge at keeping temps at bay.

Re: Model A Floor Insulation
 

Nice job. If you are interested in temp control as well as noise, I found that the stainless muffler shield really helped.

John

Re: Model A Floor Insulation
 

John, that is good to know.

I used DynaMat for sound, then insulation for heat and finally carpet. Very comfortable in my Town Sedan. (Sorry, I like pictures... :p:p)

https://www.fordbarn.com/forum/pictu...ictureid=39546

https://www.fordbarn.com/forum/pictu...ictureid=39569

https://www.fordbarn.com/forum/pictu...ictureid=39570

https://www.fordbarn.com/forum/pictu...ictureid=39571

Re: Model A Floor Insulation
 

Brent, what method did you use to insulate the roof section?