‘35 gas pedal rod? 1 Attachment(s)
On a ‘35 is there supposed to be a grommet or bushing around the gas pedal throttle rod where it goes thru the floor, see red circled in pic. Pic is of a wood floor board mine is metal with same hole I’m speaking of.
|
Re: ‘35 gas pedal rod? I have seen a 2"x2" felt square with a hole punched in the center stapled to the top side of the wooden toeboard. Not sure if that's stock.
|
Re: ‘35 gas pedal rod? Maybe a bellows-type rubber piece, like a shifter boot would be correct. I know the 51-52 F1's had something like that.
|
Re: ‘35 gas pedal rod? I dont know if its correct but it works , use a master cyl rubber boot . The truck ones are what I use
|
Re: ‘35 gas pedal rod? Model A’s send a leather type of material for this. You can find them in the A parts catalogs. I can’t imagine 35’s were much different.
|
Re: ‘35 gas pedal rod? Thx all! I was not that concerned with originality, just thought if easy to order one I would & couldn't find anything listed for the ‘35. I have some 1/8” thick leather I’ll cut & fit a piece.
|
All times are GMT -5. The time now is 06:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.