The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model-T (https://www.fordbarn.com/forum/forumdisplay.php?f=7)
-   -   New 0.030" Aluminum Pistons & Rings (https://www.fordbarn.com/forum/showthread.php?t=288091)

Marshall V. Daut 10-03-2020 09:23 AM

New 0.030" Aluminum Pistons & Rings
 
City: Davenport
State: IA
Price: 60

3 Attachment(s)
For Sale: A NEW set of 0.030” aluminum pistons with new rings for Model T’s. These pistons are not the high compression style. We installed these pistons and rings in an engine, but the cylinder bore turned out to be too worn. So, we removed them. The engine was never started, only turned over a few times. Very minor scratches from the pistons sliding down the ring compressor. Vendors sell these piston sets for $95.00 and the rings for $55.00. Our mistake in measuring is your gain: $60.00 for the four pistons with wrist pins and rings. Only actual shipping cost charged in USA, no mark up for “handling” or expensive shipping fees. You will need to adjust the ring end gap to fit your cylinders. Remember: these are brand-new pistons and rings for $90 less than what vendors charge!

Marshall V. Daut 10-04-2020 08:49 AM

Re: New 0.030" Aluminum Pistons & Rings
 

Pending receipt of funds, the pistons & rings have been sold. Thanks, "Fordbarn".
Marshall


All times are GMT -5. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.