1935-1947 Ford Pickup Parts
 

City: Los Molinos

State: Ca.

Price: $250

I have early 1935 through 1947 Ford 1/2 ton pickup parts available, I recently acquired most of two 1/2 ton pickup cabs, one chopped off top 1936 and one stock 1937 and have a lot more parts available, from frames cabs fenders & beds to hoods grills & doors,banjo rear axles & transverse spring front axles to 16" wheels & early hydraulic brakes,flathead V8 motors & parts to top loader transmissions & parts,ask and I may possibly have the part you are looking for, EMAIL FOR PICTURES, located 125 miles North of Sacramento on Highway 99, email [email protected] or call 530-384-1651

Re: 1935-1941 Ford Pickup Parts
 

Hey Aircooled, looking for a 1937 Ford 1/2 ton truck grill..

Re: 1935-1941 Ford Pickup Parts
 

I'm looking for a 35-36 glove box door.

Re: 1935-1941 Ford Pickup Parts
 

I am looking for a 1940-41 1/2 ton pickup hood and 2 fenders in good condition.

Re: 1935-1941 Ford Pickup Parts
 

I need a 35-37 pickup right front fender brace (the large one). Please advise. Thanks, Rob in WA State

Re: 1935-1941 Ford Pickup Parts
 

I need grille and front fenders for 39 pu.

Re: 1935-1941 Ford Pickup Parts
 

need passenger side front fender for 40 ford pick up

Re: 1935-1941 Ford Pickup Parts
 

Is this Jim? I am looking for 35-36 truck grill trim?

Re: 1935-1941 Ford Pickup Parts
 

HI Jim still looking for a very nice steering wheel and column drop for a 39 pic-up thanks mike p

Re: 1935-1941 Ford Pickup Parts
 

Sent you a Email about backing plates.

Re: 1935-1941 Ford Pickup Parts
 

I will be removing my steering wheel out of my 38 ford pu if interested in wheel and column drop with key let me know, I will be doing this starting in Nov., I have to figure out what cost to ask. Jerry

Re: 1935-1941 Ford Pickup Parts
 

Need front fender brackets for a '37- the large ones that the headlights mount on...

Re: 1935-1941 Ford Pickup Parts
 

You sent pics of one cab but no price. I notice that the price listed on one web site is 650 and on another it is 550.00 What are the prices on your other 35,36 cabs?

Re: 1935-1941 Ford Pickup Parts
 

my email is [email protected]

Re: 1935-1941 Ford Pickup Parts
 

I COULD USE A TITLE FOR ONE . PLEASE EMAIL [email protected]

Re: 1935-1941 Ford Pickup Parts
 

hi looking for 1937 pickup grill i am calling from mass. my number is 19786675343
or my e-mail is [email protected]. thank you Jim

Re: 1935-1941 Ford Pickup Parts
 

Am looking for a 41 Ford 1/2 ton pickup grille. Do you have one, and whats the overall condition and price? Email me at............... [email protected]

Re: 1935-1941 Ford Pickup Parts
 

Hi. I'm looking for a pair of good or workable 36 rear p/u fenders plus a good deck. C

Re: 1935-1941 Ford Pickup Parts
 

Do you have a hood pull for a 41 truck? The little handle you pull to open the hood. My email is [email protected] Thanks

Re: 1935-1941 Ford Pickup Parts
 

Re: 1935-1941 Ford Pickup Parts
 

Price on right rear fender for a '35-'37?

Re: 1935-1941 Ford Pickup Parts
 

I'm looking for the two oval shape doors(?) above the windshield guess they cover the hinge for the windshield.

Re: 1935-1941 Ford Pickup Parts
 

I have a 1937 Ford 1.5 ton that has a 1936 radiator shell, grill and hood and I would like to find a 1937 setup.

Re: 1935-1941 Ford Pickup Parts
 

I'm still looking for a '40 thru '46 mast jacket...have one??

Re: 1935-1941 Ford Pickup Parts
 

I am looking for a radiator cap for a '41 (11A over G) car(?) radiator.

Re: 1935-1941 Ford Pickup Parts
 

Jim: I am looking for a original gas guage for my 35 Ford pickup. Can you help,
Jerry: [email protected]

Re: 1935-1941 Ford Pickup Parts
 

i am looking for 6 good 20 inch 1ton bud wheels for my 1937 ford
Thanks Al

Re: 1935-1941 Ford Pickup Parts
 

Looking for a 35 or 36 Ford pickup Fuel Gauge. Thanks, Jerry

Re: 1935-1941 Ford Pickup Parts
 

looking for a cowl vent bracket and handle for 41 ford 1/2 ton thanks landshark

Re: 1935-1941 Ford Pickup Parts
 

hope to drop in....next time i'm in SAC town...

Re: 1935-1941 Ford Pickup Parts
 

I am looking for a set of rear fenders for a '41 1/2-ton. If not a pair then definitely a passenger-side one.

Re: 1935-1941 Ford Pickup Parts
 

Looking for both left and right frame center crossmembers that go between the frame rails and center crossmembers that fit 35-40 passenger or 35-41 pickup frames. Mine is a 39. [email protected] cell 603-848-6688

Re: 1935-1941 Ford Pickup Parts
 

What is a good '35 Ford cab with good doors going for ?

Re: 1935-1941 Ford Pickup Parts
 

hi, would you happen to have a good used or new window regulator for a 1941 ford drivers door?I got a emergency handle from you a while ago.thanks. [email protected] Jonathan James

Re: 1935-1941 Ford Pickup Parts
 

Looking for later 40s backing plates for conversion for my 39 coupe. I want to keep my wide 5 drums. Any help? Advice? [email protected]

Re: 1935-1941 Ford Pickup Parts
 

Do you have any rear fenders for a 36 Ford pick-up?

Re: 1935-1941 Ford Pickup Parts
 

hi,how about a window regulator for a 1941 ford pick up drivers side in good condition? thanks [email protected]

Re: 1935-1941 Ford Pickup Parts
 

Do you have any 1935 spoked ford weels, they must be crack free. Randy/In

Re: 1935-1941 Ford Pickup Parts
 

Sent you a pm...how about good doors for a 40 pickup?

Re: 1935-1941 Ford Pickup Parts
 

I guess this guy just knows how to bump , but not answer any requests?????