Rivets for grill trim
 

I am looking for a source for the rivets that hold on the stainless trim around my 1939 Pickup grill. I was able to get an old one out, and it is hollow on the inside. I am assuming that the hollow part of the rivet has to be spread so the head of the rivet pulls tight and secures the trim. The head of the rivet is fairly flat and about 5/16" across. Any source would be helpful. Thanks so much in advance.

Re: Rivets for grill trim
 

Big Flats Rivet Co. www.bigflatrivet.com 607-562-3501