Armoured ignition cable Good evening all. Can anyone tell me how the lower end that threads into the distributor is attached to the cable?
|
Re: Armoured ignition cable It's crimped very tight, and I'd never attempt to remove it.
I have removed the upsets to remove the brass plunger with it's insulating tube. |
Re: Armoured ignition cable Thanks Tom.
|
All times are GMT -5. The time now is 12:25 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.