The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   1940/41 Pickup Cab Mounting (https://www.fordbarn.com/forum/showthread.php?t=140699)

prsvf1 05-27-2014 05:54 PM

1940/41 Pickup Cab Mounting
 

I am going to be mounting my 1941 Ford Pickup cab to my frame. I have new wood blocks & new bolt kit for mounting. I am wondering if I should use frame welting or rubber pads between the frame & the blocks? I don't remember what was there when the cab was removed if it was welting, rubber pads, or both?

TJ 05-27-2014 07:25 PM

Re: 1940/41 Pickup Cab Mounting
 

My original wood had a rubber pad between the wood and the frame. It was a belting type material about 1/8" thick. I found some at my local Orchard Supply Hardware store.

Seth Swoboda 05-28-2014 08:53 AM

Re: 1940/41 Pickup Cab Mounting
 

As TJ says there should be a rubber pad. You will find them sold in kit form in any of the restoration supplier's catalogue's.

41PICUP 05-28-2014 08:57 AM

Re: 1940/41 Pickup Cab Mounting
 

Bob Drake sells rolls of the material.

41LjH 05-28-2014 08:38 PM

Re: 1940/41 Pickup Cab Mounting
 

my 41 also had rubber pads. I didn't put anything back and haven't noticed a problem. Been driving the truck for about a year and a half.


All times are GMT -5. The time now is 11:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.