I think i've got it now !!! Lets see now.
#1 Crank shafts don't bend in storage -- No matter if stored standing up or laying down. #2 Engines hung on engine stands by the bell housing will never break and fall to the ground. # 3 There is no such thing as Vapor lock. #4 ( can you add any that I may have missed ) :eek: |
Re: I think i've got it now !!! #4 Ethanol is fine for old cars and lawn equipment
|
Re: I think i've got it now !!! #5 Back in the day my flathead never overheated
|
Re: I think i've got it now !!! #6 Those lever shock arms come right off with a little heat and a hammer
|
Re: I think i've got it now !!! Why was it that my uncle had a '39 Ford in the late 40's that was overheating??
|
Re: I think i've got it now !!! Charlie you have to add a few choice words like > Dang / Darn / and my FAVORITE
BOY THATS GOING TO LEAVE A MARK |
Re: I think i've got it now !!! Quote:
|
Re: I think i've got it now !!! Scott read post #4 Charlie NY Back in the day my flathead " NEVER" over heated !!!
|
Re: I think i've got it now !!! MMO is the nector of Gods - will cure everything including vapor lock
|
Re: I think i've got it now !!! Don't you dare put those fined heads on that flathead. There only original once.
|
Re: I think i've got it now !!! #? "No problem aligning that front sheet metal on '40 Fords"
|
Re: I think i've got it now !!! # 10 Heck it won't take NO time or MUCH $$$ to finish this fresh basket case barn find >>>>>>>>>>
|
Re: I think i've got it now !!! # 11 Honey if you let me buy this car I PROMISE I will sell one of the other ones !!!
|
Re: I think i've got it now !!! Any tool / nut or bolt dropped while working on a vehicle will be found exactly in the center of said vehicle
This being true if part/tool makes it to the ground. Nothing worse than dropping part/tool and having it not make it to the ground...... Can I get a AMEN brother???? |
Re: I think i've got it now !!! Should start right up , it has only been 30 years.
O , yes and the moon is made of cheese. |
Re: I think i've got it now !!! Quote:
|
Re: I think i've got it now !!! Don't forget, lifting an engine by a carburetor base plate on an aluminum intake is fine and will never come loose.
|
Re: I think i've got it now !!! Don't worry, it'll polish out
|
Re: I think i've got it now !!! You said there is NO rust on it........well you got to really look to ever see that
You said that the paint is real nice.......well you got to really look to ever see that Youy said the body is near mint.......well you got to really look to ever see that . |
Re: I think i've got it now !!! Quote:
|
All times are GMT -5. The time now is 01:30 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.