The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Manners... A new rule... (https://www.fordbarn.com/forum/showthread.php?t=212601)

Ryan 01-13-2017 09:40 AM

Manners... A new rule...
 

I don't know where to start... So, lets start here. Read that thread in its entirety and note the seemingly endless list of people that feel as though they are being sniped or harassed by other users.

Ironically, some of the people complaining on that thread are the same people that are causing issues. Generally speaking, it's a huge mess... and I'm to blame. I just haven't done a good enough job getting rid of users that are destructive to the community. Today, I'm hoping to get back on the right track.

So, I'm introducing a new rule or protocol for dealing with users that just can't manage to post politely. It's a typical three strike rule. Essentially, a user that posts without manners will be banned for one week. A second offense and they will be banned for a month. A third offense and they will be banned permanently. Automatic bans will also be used for users that are obviously trying to cause problems for either the forum or a specific user.

We will give no special consideration for users with large post counts or specialized Ford Knowledge or anything else. It's a black and white deal.

Be nice or don't post.

***

I need help however... If someone posts something derogatory towards you, don't respond (if you further instigate the problem, you could be banned as well) - instead, use the report button. Help us weed out the people that are being so disruptive. We really need the help fellas...

Oh... and fellas... opinions are fine. However, if you can't post your opinion without bagging on someone else's you need to keep your opinion to yourself. Drama simply isn't welcomed here guys.... under ANY circumstance.

***

This is a fluid deal too. I'm working to clean the joint up and my strategies might fluctuate, but the general message will not.

Thanks fellas... and sorry for all the trouble,

Ryan
_____

tubman 01-13-2017 11:22 AM

Re: Manners... A new rule...
 

I must be dense; what is "that thread"?

40 Deluxe 01-13-2017 11:45 AM

Re: Manners... A new rule...
 

Quote:

Originally Posted by tubman (Post 1413159)
I must be dense; what is "that thread"?

Click on the underlined word "here".

Mart 01-13-2017 11:50 AM

Re: Manners... A new rule...
 

It was those Model A guys playing up again.. Lol.

Oh no, I was a little harsh in a reply earlier.

Hope I'm not on the hit list.

Mart.

Ryan 01-13-2017 11:54 AM

Re: Manners... A new rule...
 

Quote:

Originally Posted by Mart (Post 1413172)
It was those Model A guys playing up again.. Lol.

Oh no, I was a little harsh in a reply earlier.

Hope I'm not on the hit list.

Mart.

I just checked... you literally have never had a post reported. I think you are going to be ok. :)

Most of the guilty have a long and sordid history of starting trouble. They will all be gone soon... I already got two this morning!

Tim Ayers 01-13-2017 12:47 PM

Re: Manners... A new rule...
 

Thanks, Boss.

As an elementary educator, sometimes you need to lay down the law so everyone can have fun and enjoy. I'll try my best to mind my P's & Q's.

Ryan 01-13-2017 12:48 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by Tim Ayers (Post 1413203)
Thanks, Boss.

As an elementary educator, sometimes you need to lay down the law so everyone can have fun and enjoy. I'll try my best to mind my P's & Q's.

I feel like I can relate to you as an elementary educator more than I should be able too... We should compare notes! :)

tubman 01-13-2017 12:59 PM

Re: Manners... A new rule...
 

Ooops! Sorry; I'm not fully versed on some of the more sophisticated ins and outs of the internet. I'll just say that I was unaware that that sort of thing was going on so I didn't read the thread and will continue on in my blissful ignorance.

prpmmp 01-13-2017 12:59 PM

Re: Manners... A new rule...
 

Hey Ryan!! Great idea for the three strikes!! Can you implement that over at the HAMB? I got 1 strike(for being a dickhead:eek:) and was banned! Can I have at least one more strike?? :) Pete

Ryan 01-13-2017 01:14 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by prpmmp (Post 1413212)
Hey Ryan!! Great idea for the three strikes!! Can you implement that over at the HAMB? I got 1 strike(for being a dickhead:eek:) and was banned! Can I have at least one more strike?? :) Pete

Boy, did you pick the wrong day to ask...

prpmmp 01-13-2017 01:16 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by Ryan (Post 1413217)
Boy, did you pick the wrong day to ask...

Yea!! Timing is everything!! Not my strong point:eek:! Pete

David J 01-13-2017 01:46 PM

Re: Manners... A new rule...
 

Just wondering if " not politically correct " and " blunt " equates to " not polite " ? If so I may need to pack da bagz .

Ryan 01-13-2017 01:49 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by David J (Post 1413235)
Just wondering if " not politically correct " and " blunt " equates to " not polite " ? If so I may need to pack da bagz .

We don't allow politics on the ford barn and never have...

And if you are looking for the forum to teach you manners, then yeah - back your bags.

If, however, you are here for the right reasons and are capable of treating people like you would want to be treated then you are welcomed on the forum.

It's not that hard to be polite. It just isn't.

Karl 01-13-2017 02:31 PM

Re: Manners... A new rule...
 

Thank you Ryan
It has only happened to me once but I sure remember it! I offered correct information on one posters incorrect definition of third degree burns. I ended up with a criticism of not only my medical degree but also the country I live in.

I really love my early Ford and visiting this site - keeping my visits enjoyable is appreciated - Karl

tiger.1000 01-13-2017 02:34 PM

Re: Manners... A new rule...
 

The meek will inherit the earth

petehoovie 01-13-2017 02:50 PM

Re: Manners... A new rule...
 

Letting people/abusers know they are on others 'ignore' lists might help as well....

Ryan 01-13-2017 03:20 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by petehoovie (Post 1413268)
Letting people/abusers know they are on others 'ignore' lists might help as well....

I prefer the ban button... It's easier.

Ol' Ron 01-14-2017 02:16 PM

Re: Manners... A new rule...
 

Boy, I hope I'm not on that list?? I know I sometime get frustrated with some of the questions, but I try to help those that are not familiar with some part of the engine or suspension. My biggest concern is safty. These old cars are not safe in today traffic. As long as you know this, fine. But traveling 70 mph down the interstate with the original brakes can be dangerous. AS old as I am, I've seen too many nice cars damaged by this. I my self lost a nice 36 Ford because I was going too fast with the stock brakes. I learned a lesson there. Just remember an "Accident" is an unplanned event.

Ryan 01-14-2017 02:26 PM

Re: Manners... A new rule...
 

Quote:

Originally Posted by Ol' Ron (Post 1413736)
Boy, I hope I'm not on that list?? I know I sometime get frustrated with some of the questions, but I try to help those that are not familiar with some part of the engine or suspension. My biggest concern is safty. These old cars are not safe in today traffic. As long as you know this, fine. But traveling 70 mph down the interstate with the original brakes can be dangerous. AS old as I am, I've seen too many nice cars damaged by this. I my self lost a nice 36 Ford because I was going too fast with the stock brakes. I learned a lesson there. Just remember an "Accident" is an unplanned event.

You are just fine Ron.

I think most of us know who the culprits are. It's generally the same names involved year after year with this stuff.

trevo 01-14-2017 03:52 PM

Re: Manners... A new rule...
 

I am pleased this stance has been taken the vindictive nit picking nasty types are now on notice cheers Ryan


All times are GMT -5. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.