The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Whoops (https://www.fordbarn.com/forum/showthread.php?t=304244)

Dennis Pereira 09-24-2021 01:13 PM

Whoops
 

2 Attachment(s)
Working on a rear brake assembly things were going to smooth . I put the E-brake return spring on the wrong lever I had 4 springs two silver and two black .

wrndln 09-24-2021 01:32 PM

Re: Whoops
 

1 Attachment(s)
Dennis, did you use the notched 2 screwdrivers to install the spring - see picture attached. They make the job much easier.

Rusty Nelson

Dennis Pereira 09-24-2021 02:00 PM

Re: Whoops
 

Quote:

Originally Posted by wrndln (Post 2059803)
Dennis, did you use the notched 2 screwdrivers to install the spring - see picture attached. They make the job much easier.

Rusty Nelson

Thanks Rusty maybe I'll make a couple to get it off .

mercman from oz 09-24-2021 04:48 PM

Re: Whoops
 

https://www.fordbarn.com/forum/attac...p;d=1632507119

https://www.fordbarn.com/forum/attac...p;d=1632507146

Dennis Pereira working on a rear brake assembly

mercman from oz 09-24-2021 04:50 PM

Re: Whoops
 

https://www.fordbarn.com/forum/attac...p;d=1632508285
Notched Screw Driver - wrndln

nkaminar 09-25-2021 07:19 AM

Re: Whoops
 

I just finished putting the rebuilt rear backing plates on. I had to take the radius rods off to get them on. But this was easier than taking off the arms and putting the emergency brake spring on by laying under the car.

Dennis Pereira 09-25-2021 01:26 PM

Re: Whoops
 

Quote:

Originally Posted by nkaminar (Post 2060053)
I just finished putting the rebuilt rear backing plates on. I had to take the radius rods off to get them on. But this was easier than taking off the arms and putting the emergency brake spring on by laying under the car.

I agree that's the way I'm doing it also but my body is off the frame .


All times are GMT -5. The time now is 11:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.