1954 mercury are the iner fenders and radiator suport the same for 52 to 54 ford and mercury
|
Re: 1954 mercury I know the fenders are different, checked with my buddies 54 Ford. The inner fenders & core support look the same by eye balling them, but heck I bought some Ford vent window handles that looked alike, but the hole for the push pin in the Ford was smaller. Had to drill it out in my Merc.
|
Re: 1954 mercury There not the same52 was a flathead as was 53.54 was ohv engine.i owned a 54.they dont interchange.
|
Re: 1954 mercury i was not asking about the engine i want to know about the iner fenders
|
Re: 1954 mercury 1952-53 Had kingpin suspension in 1954 when the I.F.S.suspension came out the inner and outer fenders were changed to clear the A arms,can you put an entire 52-53 front clip on a '54? the answer is yes, if you do a bunch of trimming and re-drilling of the mounting holes using the old '54 parts to measure and make templates from.The 52-54 hoods and hood hinges do interchange,this has been done to customize Fords by changing to a Merc front clip.Click on this for pix of a 1954 Ford crestline Victoria front clip is Mercury with a Lincoln rear clip.http://www.jalopyjournal.com/forum/a...id=5281&page=2
|
Re: 1954 mercury THEY DONT INTERCHANGE BECAUSEof the engines.!
|
Re: 1954 mercury I was wondering if the trunk of a 54 ford customline post car be the same as a 1954 mercury monterey hard top? looks the same but not sure...
|
All times are GMT -5. The time now is 06:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.