Pressure check 3rd main. Model B Hey all
Just looking for a little advice. I am going to install a 3rd main oil seal In a Model B engine. The instructions say to pressure check the main bearing with oil to 10lbs. I’m wondering what the best way is to go about that. Thanks |
Re: Pressure check 3rd main. Model B I use an old butane tank rigged to put air pressure on top of the oil in the tank and force it into the valve cover. I have full-pressure engines so already have an inlet in the cover. Won't work on a Model A, only on B's.
|
All times are GMT -5. The time now is 05:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.