39 Frame- Worn wishbone socket The front wishbone ball socket on my 39 frame is toast. I was considering using pieces of a Model A two piece socket as a repair. Does anyone sell a patch kit, or is this the suggested fix? Otherwise I'd have to fabricate one and weld it in.
Thanks in advance, this is the BEST place for advice on this old iron! |
Re: 39 Frame- Worn wishbone socket Could you not just use a second lower part as a new upper seat? Bolts in and a couple of decent weld beads would make sure it doesn't move. Slightly longer bolts might be needed.
Can I just check.. You do realise there is a rubber ball used in that location? Mart. |
Re: 39 Frame- Worn wishbone socket Yes, I have purchased another cover and a rubber cover. I was just curious what others say.
Sent from my iPhone using Tapatalk |
Re: 39 Frame- Worn wishbone socket Can you find one off a junk frame and just replace it? Wouldn’t 35-40 ball socket all be the same?
|
Re: 39 Frame- Worn wishbone socket I guess that’s what I’m trying to do. Not many left in the rust belt.
Sent from my iPhone using Tapatalk |
Re: 39 Frame- Worn wishbone socket Quote:
I like the two caps idea. Or the model a parts. Karl |
Re: 39 Frame- Worn wishbone socket Don't think the Model A parts will work as they didn't use the rubber ball
like the later Ford's. The aftermarket rubber ball for the Model A's used cast upper and lower metal parts. |
Re: 39 Frame- Worn wishbone socket I ordered a handful of pieces. I’ll post a photo before and after when it’s fixed.
Sent from my iPhone using Tapatalk |
Re: 39 Frame- Worn wishbone socket |
Re: 39 Frame- Worn wishbone socket |
Re: 39 Frame- Worn wishbone socket |
Re: 39 Frame- Worn wishbone socket |
Re: 39 Frame- Worn wishbone socket Wow. To call that Toast, insults toast. Waiting on some "after" photos.
|
Re: 39 Frame- Worn wishbone socket Quote:
They are uploaded. Sent from my iPhone using Tapatalk |
Re: 39 Frame- Worn wishbone socket They are not showing up here.
|
Re: 39 Frame- Worn wishbone socket I can see them.
|
Re: 39 Frame- Worn wishbone socket Pics in post #11 & #12 are the repairs?
|
Re: 39 Frame- Worn wishbone socket .
Something we made-up from some saved scraps & a machined receiver chunk of steel. DD https://www.fordbarn.com/forum/attac...4&d=1475689495 https://www.fordbarn.com/forum/attac...0&d=1475955139 https://www.fordbarn.com/forum/attac...6&d=1475690427 https://www.fordbarn.com/forum/attac...7&d=1475690688 https://www.fordbarn.com/forum/attac...8&d=1475691075 https://www.fordbarn.com/forum/attac...9&d=1475691545 . |
Re: 39 Frame- Worn wishbone socket V8COOPMAN you are an artist!
Sent from my iPhone using Tapatalk |
Re: 39 Frame- Worn wishbone socket V8: Your engineering is super nice. Does your repair change the castor angle?
|
All times are GMT -5. The time now is 07:25 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.