Engine Turned Guage Panels Looking for a resource that can engine turn a Guage Panel.
Thanks, Ryan |
Re: Engine Turned Guage Panels We did this in auto shop Burbank High in 1963. any machine shop should be able to do a good job. Or do it your self https://www.youtube.com/watch?v=5EnkbQ2UY58
|
Re: Engine Turned Guage Panels Ryan,
Check out this website: jbmicrofinish.com or call Jeff at 815-842-2279 He is in Pontiac, Illinois Jeff can make custom engine turned gauge panels in aluminum or he will engine turn your gauge panel. Steve |
Re: Engine Turned Guage Panels 1 Attachment(s)
This fellow did mine:
Bob Marchese Lakewood,CO 303-985-9622 |
Re: Engine Turned Guage Panels Quote:
|
Re: Engine Turned Guage Panels Quote:
|
Re: Engine Turned Guage Panels 1 Attachment(s)
I engine turn '32 &'33 panels, computer generated pattern, copper, nickel and chrome plating.
Tom |
Re: Engine Turned Guage Panels Gents,
Appreciate all the guidance! Regards, Ryan |
All times are GMT -5. The time now is 12:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.