Re: Truck based woody
 

That's what I'm talking about. Wood floor with steel wheel tubs. I would use perhaps two layers of 5/8 plywood bonded together, staggering the joints and vacuum press maybe 1/4" solid wood to it. Would it be typical to use bed strips? Oh some bad news the '47 truck on CL was sold when I called to tell him I had ferry reservations for Friday. The listing said 400.00 or any offer considered. Ya snooze yo lose. Something else will come up in the meantime. I really need to complete my tonner panel this winter, but will continue to gather parts and research this woody project. Here's the one that got away.

Re: Truck based woody
 

GB,

If you notice, the area between the wheel wells is sheet metal. The piece consists of five parts; the two wells, two side sections, and a center section. All the pieces are spot welded at flanges, except the wells, that are spot welded on the main surface. The wood floors consist of a front frame made of maple and oak and two floor boards inside the frame, made of 11/16 thick 5 ply plywood. The rear sections on either side of the wheel wells/floor pan, are maple floor boards running perpendicular to the frame and fastened to the frame and pan.

Keep V-8ing and 4-banging!

Re: Truck based woody
 

We still need to keep in mind that with a truck based woody, the builder might not have had all those same parts, perhaps just the cowl. I have purchased (traded for) 4 jailbar trucks, one is a 1/2 ton panel that has spent some time on it's roof.... Perhaps just the ticket for those wheel wells an has decent rear fenders too! There's also some nice cabs, seats, a nice tonner with new tires and a title, a factory cowl piece for jailbar delivery trucks, a running 8ba, a complete 1/2 ton pu with a title, 2 extra panel doors, two extra truck doors, 2 very good rear 1/2 ton pu fenders etc etc.... I am on my way to cutting one of the cabs with bad back corners and floors to make a good cowl piece. I still have 3 more loads East of the cascades to finish it out...... What I'm wondering so I can start some preliminary mock-up and thought process over the 3 day weekend is does anyone have specs/drawings of a 1/2 ton jailbar panel? The one I'm getting is still ovr there til next week or two. Also interested in what the normal panels have above the windshield to accept the wood top framing. On that great video that was posted a while back, he was pounding wood into some kind of recess at the header. Anyone have a un-built woody can show a picture? Thanks much in advance. Took the ugliest stuff first so I wouldn't run outa steam and leave some over there. Next trip will be the tonner or the panel. Too bad no back doors on it.....

Re: Truck based woody
 

Within the past two or three years a jailbar woodie was featured in the "Woodie Times" the monthly newsletter of the National Woodie Club. Can't remember where it was located. I'll see if I can find the copy and let you know which issue it was. The truck was very well done. Can't remember if they retained the original drivetrain.... Bill

Re: Truck based woody
 

Here's the half ton panel and light duty cab/chassis. If you want the tonner drawings I have them too. Also, please email me your address so I can mail the Campbell Midstate diagram. I'm sure I still have it but finding it is another matter. Stu

http://i286.photobucket.com/albums/l...ps6lkvqcn1.jpg
http://i286.photobucket.com/albums/l...psge2g5hua.jpg

Re: Truck based woody
 

Wow, Thanks Stu. I think I'll start with a 1/2 ton truck based woody, perhaps sell it when complete. Next I will build a tonner based woody for myself. How cool would that be? This haul from Twisp looks better and better as I scrape off the moss. Under the moss and needles is very solid sheet metal. That doesn't happen west of the cascades..... I will soon have my very own junkyard consisting entirely of jailbar trucks, and maybe another today... It can't be any worse than the stock market. Have you ever tried to gaze upon or fondle a stock market shareholder certificate? I haven't, but a really nice 1/2 ton rear fender? Or two? ......:D Off to dinner with the missus, will get serious with drawings tomorrow. GB

Re: Truck based woody
 

As a kid in High School I drove a 1947 Ford 1/2ton Panel...Next to Woodies they are my favorite ..That said at the Wavecrest Woodie Meet three years ago the was a Woodie built in a 1/2 Ton Ford Panel chassis...He drove it to the meet from New York...He too was a Woodworker and adjusted a lot of the lines of a passenger Woodie....It looked good and didn't look Fake or Made-up....! I'll look at my National Woodie Club Rooster and see if I could find a contact for you...Good luck on your project.....Carl...

Re: Truck based woody
 

Like a "Dummy" I hadn't read the 2nd page before I wrote my reply..I didn't see and hadn't read "Bill's " reply....That Woodie is the same one that drove to Wavecrest...Anyway,,We're pullin' for Ya,,,,We're all in this thing together....Carl...aka..Slim over at "The Lazy S Ranch" Montose,CO.

Re: Truck based woody
 

So I dug thru the pile and found Sept /13 copy of Woodie Times. Get ready to cash in yours and the wifes' 401 K. The build is spectacular I'd estimate 80/100K to do it. The truck is located in Cedar Mi. Wood by Mike Nickels of Traverse City Mi. to resemble 41/48 wood. Built on a Wagoneer chassis. Maybe another NWC member can upload the article. Beyond my limited skills. All in all a very well executed job just not cheap! By the way Wavecrest takes place in Encinitas Ca. Sept 17/20. Am I going? You bet! Lotsa flathead and modified woodies all in one place. I'll take some pics of the originals and try to post when I get back... Bill

Re: Truck based woody
 

This should be it. Stu

http://i286.photobucket.com/albums/l...psdujmxxnq.jpg

Re: Truck based woody
 

That is a beautiful truck!

Re: Truck based woody
 

That's the truck! Thanks Stu now do you have any more pics to post? The truck is titled as a 42. Powertrain is by GM. Again a well executed project... Bill

Re: Truck based woody
 

Somewhere I have pics that Gary wanted of the joint where the wood meets the metal of the windshield surround. But I'm away from home today so will post it later. Stu

Re: Truck based woody
 

Stu,
You got those pics but for the 1/2 ton pickup?
Be lovely to see them.
Thanks,
Martin.

Re: Truck based woody
 

Pickup.

http://i286.photobucket.com/albums/l...ts/Image-1.jpg

Stake bed

http://i286.photobucket.com/albums/l...pscjeejf2s.jpg

Re: Truck based woody
 

Maybe this could help too, even though it's a '37. Stu

http://i286.photobucket.com/albums/l...ps8z5rmbfy.jpg

Re: Truck based woody
 

Wow,,,I stand corrected.....I was a few States Off....Sure enough that's the truck I was thinking of...Thanks Bill for following through,and yes he's in the Directory... Maybe one of us could contact him and get him into the Post....
PS ..I'm still up in the air if I'm gunna load up the car and head to Wavecrest..Carl

Re: Truck based woody
 

Thanks tons Stu and others! It's pouring out and most of this new metal is still outside so I hope to do a little research today. As miraculous as it sounds, a summer resident just across the county road has a nice collection of vintage vehicles in an 8 car garage. One is a beautifully restored '40 ford woody wagon. I don't know him too well, but I'm thinking since it's Labor Day weekend he may be at his vacation home so I plan to drop in on him if he's there.

Re: Truck based woody
 

Thanks for the pics stu.
Martin.

Re: Truck based woody
 

Dang, talked to his wife and he sold it.... Cleaned and surveyed 2 '47 cabs trying to decide which one to cut off at the header and rear floor. Such a tough decision. One is a better cowl and one has a better floor. Back east or rust belt, you'd get horse whipped for cutting up either one!