Model A valves Who sells the best modern valve kit for the model A.
|
Re: Model A valves Dennis Piranio has a very good conversion kit(and other stuff) http://www.modelaparts.net/webbcat.htm/catp31.htm Worked for me. His page is kinda hard to get around in, but lots of good stuff and info.
|
Re: Model A valves The modern Snyders kit works well as well. Not sure if same kit or not but the modern setup with single lock lifters is the way to go.
|
Re: Model A valves I and others report good experience with those from Richard Falluca, of Anitique Engine Rebuilding. https://www.antiqueenginerebuilding.com/index.html
My understanding is that these are the parts that Snyder's sells. Additionally, Richard offers oversize intake values (requiring also oversize valve seats, mandating minor block machining), which do not seem to be listed in Snyder's or others' catalog listings. I intend no derogation towards Piranio's offering, I just have no experience or knowledge of them. |
Re: Model A valves Thanks for all the info.
|
All times are GMT -5. The time now is 01:36 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.