The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   1930 Phaeton floor parts question. (https://www.fordbarn.com/forum/showthread.php?t=69475)

Firedome 04-25-2012 01:51 PM

1930 Phaeton floor parts question.
 

I need to replace the rear seat base and floors in a 30 Standard Phaeton (35B) but all I see in the Macs/Snyders/Mike's catalogs are for the 28/29 model....

So is this the same on the 30/31 models?

If there is a difference, can someone point it out or is this something I can modify these parts fairly easily to fit (via cut & weld)?

Thanks in advance!

-Clif

BRENT in 10-uh-C 04-25-2012 06:20 PM

Re: 1930 Phaeton floor parts question.
 

With modifications you can use them. Most that I have used do not come with the "hump" and that must be spot-welded in and ordered as a seperate piece. On my website is a picture of a '30 Phaeton that we did with all new lower sheetmetal.

Firedome 04-26-2012 11:22 AM

Re: 1930 Phaeton floor parts question.
 

Thanks Brent! BTW...beautiful job on that Phaeton! Mine is not nearly as far gone as what you started with. Just needs the floor and a completely new top.


All times are GMT -5. The time now is 12:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.